KHUSHICONTROLSYSTEM 57d667ee9ec66a0ac452935e False 63 37
OK
Products

No results found!

Cx2000 AC Drives
Cx2000 AC Drives INR 6500 INR 6500
57e1100f9ec6683114090f7d
-0%

Cx2000 AC Drives

The Cx2000 AC Drives is perfectly suited for conveyors, pumps, fans and textile machinery. It handles loads up to 11 kW, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India's industrial environment. Range: Single Phase 230V - 0.1 to 2.2kW Three Phase 230V - 0.2 to 11kW Three Phase 415V - 0.75 to 11kW Enclosures: IP20 Features: V/F Control, Sensorless Vector Control, Slip Compensation Starting Torque 150% at 3 Hz Built-in Potentiometer Conformal Coated PCB Built-in RS485 Modbus RPM Display Draw Mode Brake Control Compact, Lightweight, Easy to install, Operate and service Auto Tuning Built-in PID 2nd Motor Operation Built-in Safety circuit Built-in Braking Chopper up to 11kW Dual rating operation: Designed to be used for heavy and normal duty applications. Overload capacity: Heavy duty operation: 150% of rated current for 60 sec Normal duty operation: 110% of rated current for 60 sec Built-in Potentiometer: Possible to add reference from keypad and external signal Provides external potentiometer for easier frequency control Built-in PID: Cx2000 has built-in PID which saves use of external PID 2nd Motor Operation: Single AC Drive can maintain 2 motor parameters connected to 2 different loads with different Accel / Deccl parameter setting For isolated operation of motors one VFD can be used in place of 2 Easy Maintenance: Tool-less replacement of Cooling Fan. Built-in Brake Chopper: Built-in brake chopper which saves panel space.

INR 6500 INR 6500

Availability:True

Pay mode:COD only

1474367503
Sx 2000 AC Drives
Sx 2000 AC Drives INR 16000 INR 16000
57e110689ec6682158d11751
-0%

Sx 2000 AC Drives

The Sx 2000 AC Drives is built to deliver powerful performance. It handles loads up to 75 kW (HD) / 90 kW (ND) – making it perfect for compressors, conveyors, machine tools, elevators, textiles, fans, pumps, plastic extruders, wire drawings, etc. Range: Single-Phase 230V - 0.75 to 3.7kW Three-Phase 230V - 0.75 to 18.5kW Three-Phase 415V - 0.75 to 90kW IP66 Three-Phase 415V - 0.75 to 22kW Enclosure: IP20 standard & IP66 Optional Features: V/F, Sensorless Vector Control, Slip compensation Starting Torque: 150% at 3 Hz for V/F, 200% at 0.5Hz for Vector Control Conformal Coating complying to IEC 60721-3-3 class 3C2 Built-in RS485 Modbus Peer to Peer Communication to share I/O’s Built-in Brake Control Inbuilt PLC functionality Component Life Monitor Inbuilt PID Multi Keypad No Motor Detection Built-in DC Reactor from 37kW to 90kW Built-in Braking Chopper till 30kW Dual rating operation: Designed to be used for heavy and normal duty applications. Overload capacity: Heavy duty operation: 150% of rated current for 60 sec Normal duty operation: 120% of rated current for 60 sec Safety Disable function (Safety Stop): Sx2000 is compliant to the EU Machinery Directive without the additional of previously required external devices. Through this compliance, Sx2000 reduces the number of peripheral devices needed to satisfy safety regulation. It results in cost, space, and maintenance reduction. Enhanced Brake control: Ideal for Crane & Lifts: Brake release with Delay Brake Close frequency different settings possible for Hoisting & Lowering Motion Brake opening command by Drive under following conditions: Inverter Output Frequency > Brake Release Frequency AND Inverter Output Current > Brake Release Current Multi-Keypad: Optional LCD keypad of Master drive enables to access every drive (Slave) connected via inbuilt RS485 communication so that the users adjust and monitor parameters easily. P2P communication: Peer to peer communication among the drives allows sharing any I/O via inbuilt RS485 communication. It might be useful in case of limited number of I/O points for a certain system User Sequence: Built-in PLC Functionality: User sequence creates a simple sequence from a combination of different function blocks with direct access to Drive parameters. No Software required to create logic The sequence can comprise of a maximum of 18 steps using 28 functions blocks. Function blocks: AND, NOR, ADD, SUB, MIN, MAX, COMPARE, TIMER, XOR, SWITCH, UP/DWN COUNT...etc Component Life Monitoring: Sx2000 monitors both main capacitor’s lifecycle and Fan. When the life span of Fan is near, Sx2000 outputs via Relay or Digital output as a alarm sign. Smart Copier: It allows users to download & upload the parameters from/to Sx2000 without AC input power. Easy download of Customized firmware from copy unit to drive Copy paste of parameters Optional Communication Cards: CANopen Profibus DP Modbus TCP /Ethernet I/P) Flange option: Sx2000 allows its heatsink to be installed outside of panel for better cooling system with this option.

INR 16000 INR 16000

Availability:True

Pay mode:COD only

1474367592
Fx 2000 AC Drives
Fx 2000 AC Drives INR 20000 INR 20000
57e110a39ec6680b4482399f
-0%

Fx 2000 AC Drives

Fx 2000 AC Drives generates powerful performance and meets the precise needs through several features such as superior V/F control, V/F PG, slip compensation and sensor less vector control as well as closed-loop vector control. These do not need any kind of external potentiometer and it is possible to add reference from keypad and external signal. Features: Powerful performance Superior V/F control Fine V/F Slip Specifications: 3-Phase 415V 0.75 to 375kW (HD) Starting Torque: 250% at 0Hz for Closed Loop Built-in RS485 Modbus RTU Communication Applications: Pumps Conveyors Wire Drawing

INR 20000 INR 20000

Availability:True

Pay mode:COD only

1474367651
Ex 2000 AC Drives
Ex 2000 AC Drives INR 0 INR 0
57e110c99ec6682874ae2336
-0%

Ex 2000 AC Drives

Ex 2000 AC Drives is perfectly suited for fan and pump applications. It can handle loads up to 450 kW, and is engineered to keep your machine operating at optimum efficiency – even in the hot, humid and dusty conditions that characterize India's industrial environment. It has features that save energy and cost, and is easy to operate. Range: Three Phase 415V - 5.5 to 450kW Enclosure: IP20 till 11Kw & IP00 till 450Kw Features: V/F, Sensorless Vector Control, Slip Compensation Starting Torque: 200% at 0.5Hz for Sensorless Control Conformal Coating complying to IEC 60721-3-3 class 3C2 Built-in RS485 Modbus Built-in Booster pump control Dual PID Pre-heat Function Reverse Rotation Prevention Component Life Monitoring Built-in DC Reactor from 22kW to 280kW Dual rating operation: Designed to be used for heavy and normal duty applications. Overload capacity: Heavy duty operation: 150% of rated current for 60 sec Normal duty operation: 110% of rated current for 60 sec Booster Pump: It is used when a single drive is used to control multiple motors in pump systems, by default 4 Pumps can be controlled & Max upto 8 pumps can be controlled Precise Control of pressure Ideal cost effective solution for constant pressure / constant flow pumping application PID & Dual PID: In the centrifugal fan and pump, PID control is provided as a standard function in order to maintain a constant pressure, flow or level Where external or cascaded PID control is required, the built-in dual PID algorithm of the Ex2000 can be utilised to satisfy various system requirements Sleep & Wake Function: It automatically switches OFF Drive during user-programmed low- load conditions and then to start-up again when process demand increases It helps eliminate unnecessary operation at idle speeds, thus saving wear and tear, as well as energy PID Control Automatic Energy Saving: Load change may incur energy losses. But the optimised flux control of the Ex2000 results in more outstanding energy-saving Pre Heat Function: It allows the drive to maintain residual heat in the motor, which helps eliminate condensation in damp conditions when the motor is not in use. In the drive, an adjustable, low-level DC current is applied to the stator windings either continuously or on a duty cycle basis KEB: During power dips or momentary power outage, the drive’s output can be maintained by utilising the residual mechanical energy in the load as a regenerative source. The duration of the power-dip ride-through depends on the load characteristics Removable Terminal Block: In case of AC Drive failure, control card of the existing drive can be replaced to new drive with wiring Reduces the downtime of AC Drive replacement

INR 0 INR 0

Availability:True

Pay mode:COD only

1474367689
Lx 2000 AC Drives
Lx 2000 AC Drives INR 0 INR 0
57e111519ec6682158d11771
-0%

Lx 2000 AC Drives

The Lx 2000 AC Drives is designed specifically to add power to elevator performance. Built to L&;T’s stringent quality standards, the Lx2000 is tested and certified to meet global benchmarks, thus giving you the assurance of total reliability.It handles loads up to 22kW, and is engineered to keep your elevator operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India’s industrial environment. Range: Three Phase 415V - 2.2 to 22kW Enclosure: IP00 Control method: Sensorless vector control Closed Loop Vector Control Features: Ideal for High Speed Elevator Control Suitable for geared / gearless machines Starting Torque 200% at 0Hz for Closed Loop & 200% at 0.5Hz for Open Loop Control Compatibility with various types of encoders Built-in Line driver & open collector (Incremental) encoder feedback card Anti-roll-back algorithm Built-in ARD function Distance Control through ELIO card Built-in Braking chopper till 22kW Conformal Coating complying to IEC 60721-3-3 class 3C2 Overload Capacity: Designed to be used for heavy duty applications. Overload capacity:Heavy duty operation: 150% of rated current 60 sec Built-in brake control for safe vertical loading: To minimize risk of the elevator’s giving in to the gravitational pull of the earth, brake-control is built in. Extreme precise control ELIO Option on board (Distance learning): Accepts position sensor input ( rid switches etc ) Measures height & stores floor count Displays floor number, speed in elevator units Reduces creep time Controls position Advance door opening Handshaking with elevator controller Optional Encoder Cards: Sin/Cos encoder Endat encoder (ECN413, ECN1313, ERN1387, ERN487 encoders) Applications: Geared elevator – Induction Motor based Gearless elevator – PM Motor based

INR 0 INR 0

Availability:True

Pay mode:COD only

1474367825
Programmable Logic Controller
Programmable Logic Controller INR 0 INR 0
57e112289ec6683114090fc5
-0%

Programmable Logic Controller

Enriched by the vast experience, we are engaged in offering a wide range of Programmable Logic Controller to the clients. Our products are have fast and powerful processors & have basic instruction execution 0, 2 micro-sec. Program memory of 20K with built-in flash EEPROM backup, this range have data memory of 7K that is built-in PID control. Suitable for applications combining multiple devices, which is spread over a large installation. Feature: Control up to 1600 digital I/O points Flexible and specialty I/O modules Range of I/O base opt on (from 3 to 12 slots) Built-in real T me clock (RTC) & 8 loop PID control Up to 96 slave nodes can be connected using remote I/O master and remote I/O slave Peer - Peer communications for data sharing and remote programming possible with MW-LINK module Serial common cat on unit (SCU) comes with 2 signal ports for add tonal communication requirements 2 serial ports (RS232C/RS485 with modbus RTU / user defined protocol) with baud rate up to 38400 bps

INR 0 INR 0

Availability:True

Pay mode:COD only

1474368040
Micro Logic Controller
Micro Logic Controller INR 0 INR 0
57e112499ec6682158d1179d
-0%

Micro Logic Controller

With our vast industrial experience, we have came up with a wide range of Micro Logic Controller. Ideal for simple applications, our offered range is compact yet its big on performance that provides high-speed advanced networking and a full suite of control capabilities. Besides, patrons can easily avail all our products as per their requirements. Specification: Control 10, 14, 20, 28, 40, 48 digital I/O ports 2 serial ports (1 RS-232C, 1 50485 with module RTU) Program memory size up to 2K words Built-in backup flash memory Built-in HSC, pulse output (for TR output module only) Attributes: Basic control to 28,48 points and up to 104 digital I/O points Expansion up-to two modules each of 28 points 2 serial ports (2 RS232C/RS485 with modbus RTU) Program memory size up 9K words Built-in HSC, pulse catch, pulse output (for 'TR output module) Built-in real-time clock, PID function

INR 0 INR 0

Availability:True

Pay mode:COD only

1474368073
Cx2000 Compact Series
Cx2000 Compact Series INR 0 INR 0
5ac8fcf35c379c0b9c9af034
-0%

Cx2000 Compact Series

Cx2000 Compact Series The Cx2000 Compact Series is perfectly suited for conveyors, pumps, fans and textile machinery. It handles loads up to 11 kW, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India's industrial environment. Product Range:- Single Phase 230V - 0.1 to 2.2kW. Three Phase 230V - 0.2 to 11kW. Three Phase 415V - 0.75 to 11kW. Enclosures:- IP20. Features:- V/F, sensorless vector control, slip compensation . Starting Torque 150% at 3 Hz. Built-in Potentiometer. Conformal Coated PCB. RPM Display. Draw mode. Brake Control. Compact, Lightweight,Easy to install Operate and service. Auto Tuning. Built-in PID. 2nd Motor Operation. Built-in Safety circuit. Built-in Braking Chopper up to 11kW. Applications:- OEM Machines. Plastic & Textile Machines . Food & Packaging Machines . Conveyors n AHU Control n . Fan n Pump . Crane Control LT / CT. Dual rating operation:- Designed to be used for heavy and normal duty applications. Overload capacity:- Heavy duty operation: 150% of rated current for 60 sec. Normal duty operation: 110% of rated current for 60 sec. Built-in Potentiometer:- Possible to add reference from keypad and external signal. Provides external potentiometer for easier frequency control. Built-in PID:- Cx2000 has built-in PID which saves use of external PID. 2nd Motor Operation:- Single AC Drive can maintain 2 motor parameters connected to 2 different loads with different Accel / Deccl parameter setting. For isolated operation of motors one VFD can be used in place of 2 Easy Maintenance:- Tool-less replacement of Cooling Fan. Built-in Brake Chopper:- Built-in brake chopper which saves panel space.

INR 0 INR 0

Availability:True

Pay mode:COD only

1523121395

Our timings

[IS_BIZ_OPEN] Mon: 9:00 AM  -  6:00 PM
[IS_BIZ_OPEN] Tue: 9:00 AM  -  6:00 PM
[IS_BIZ_OPEN] Wed: 9:00 AM  -  6:00 PM
[IS_BIZ_OPEN] Thu: 9:00 AM  -  6:00 PM
[IS_BIZ_OPEN] Fri: 9:00 AM  -  6:00 PM
[IS_BIZ_OPEN] Sat: 9:00 AM  -  6:00 PM
[IS_BIZ_OPEN] Sun: Closed  -  Closed

Contact

118 & 119, Mahadev Complex, Nr. Ramol Police Station, Opp. Mahadev Estate-3, CTM-RAMOL Road, Ramol, .
+91 8033769282  or   or   
Please keep or 0 before the
number when you dial.
Share Tweet
22.9917779 72.6425323 Khushi Control System | L&T authorised dealers 118 & 119, Mahadev Complex, Nr. Ramol Police Station, Opp. Mahadev Estate-3, CTM-RAMOL Road, Ramol, .
False

SUBSCRIBE

57d667ee9ec66a0ac452935eKHUSHICONTROLSYSTEM57c3c1a65d64370d7cf4eb17